TESTED: 2023.5 CAN-AM OUTLANDER XT 700 (2024)

To be clear, Can-Am’s new Outlander 700 is replacing the Outlander 570, and the new Outlander 500 replaces the Outlander 450. Like many of you, we were also confused when news broke from Can-Am about the new mid-size Outlanders. Why would Can-Am replace the 570 V-twin with a single cylinder engine? And how do you get a 500 and 700 class machine using the same new 650cc displacement?

Can-Am tells us the differences are centered around the camshaft and the engine control unit (ECU). The Outlander 700 receives a high-performance cam and ECU programming for maximum power, which adds up to 50-horsepower and 41 pound-feet of torque. The Outlander 500 makes 40-horsepower and 37 pound-feet of torque. Still confused? We were too but Can-Am says it basically comes down to getting more engine and class-leading performance at the lowest price in the class, which they essentially did; It’s hard to argue more for less! Base model vs. base model, the Outlander 700 makes more power and costs less than the competition’s mid-level offerings, and even edges out the 518cc Honda Foreman and 493cc Suzuki KingQuad 500 by $100 or more. Only CFMOTO’s 45-horse CFORCE 600 beats the Outlander 700 on price.

There’s far more to the new Outlander than just power and value, however. These machines are 100-percent new from the ground up, so there’s a lot more to go over. Let’s dig in!


The Rotax 650cc ACE (Advanced Combustion Efficiency) engine is like nothing we’ve ever seen in a Can-Am ATV before. The top end leans toward the rear with the EFI throttle body entering from the front. The engine air intake is located up high ahead of the handlebars, where it takes in cooler air than it would from a traditional airbox setup located behind or on top of a hot engine. Anyone that builds engines will tell you that cooler air makes more power. A shorter exhaust system exits directly out the back of the ATV. This design, along with a tin heat shield, keeps heat away from the legs and seat and saves weight

With a push of the e-start button, the engine emits a quieter, but still familiar Rotax rumble. With the gear selector in high-range, throttle response is light and predictable when we needed it to be. Mash the throttle, and the Outlander accelerates quickly, but without the overzealous excitement of a big bore. Power delivery is linear, and friendly enough for a novice rider to adapt to quickly, but will keep advanced skill sets happy at the same time. You can even get some lift out of the front wheels under hard acceleration to overtake obstacles.

Can-Am tells us the Outlander 700 peaks at 50-horsepower, while the old Outlander 570 was good for 48-horsepower, but it’s the more usable range from idle to three-quarter throttle that’s more impressive with gains as high as five-horsepower. Likewise, torque is also increased by four to seven pound-feet in the usable range.


The automatic continuously variable transmission (CVT) is massive and built for much heavier side-by-side use, so it should be reliable. Much of the tech came from use in the Maverick X3 Turbo RR side-by-side like the pDrive pulley, which uses rollers instead of ramps for quicker acceleration and less wear.

The CVT air intake is also located up high and ahead of the handlebars, forcing cooler air into the belt drive housing to extend belt life. The CVT also includes separate exhaust ductwork that runs up below the seat and out the rear, keeping heat away from the rider. If your plans are to submerge your ATV past the seat, you might want to look at the mud-specific Outlander X MR 700 with snorkeled ductwork.

Shifting is gated, but it isn’t notchy or difficult like past Can-Am ATVs. With the engine on or off, you can slide the shifter from park to low without hangup. The shifter is also positioned in a way that it’s easy to access on hills and with the bars turned to full lock, very useful when the trail ahead requires frequent shifting between high and low range.


During our two days of riding with Can-Am, there wasn’t any part of the test track that the Outlander couldn’t handle in 2WD. That said, it does have selectable 4WD, which can be toggled on the fly without releasing the hand grip.

We are disappointed to see that the Outlander XT 700 isn’t equipped with Can-Am’s Visco 4-Lok fully lockable front differential. You can only get it on the more utility focused and stiffer sprung Outlander Pro HD5, HD7, and Outlander X MR 700 mud machine. However, the XT package does get upgraded from the base model with the quicker engaging automatic Visco-Lok QE differential.


The new high-strength tensile steel frame still has some flex to it, and that’s a good thing! We spent hours on the test track at varying RPM without any hint of vibration or numbness to the fingers. Standard bumpers include tabs for mounting accessory lights, and the frame has integrated mounting points for installation of Can-Am’s snow track systems and plows, reducing setup time and effort by 50 percent.

Standard skid plate protection includes full length frame coverage with 7/32-inch high-impact resistant polyethylene. If your trail preference includes rock crawling and log leaping, Can-Am offers optional hybrid aluminum and polyethylene 3/8-inch protection that includes wrap-around coverage of front and rear A-arms and footwells.


Suspension is overwhelmingly our favorite feature, which was surprising since they replaced the rear torsional trailing arms with A-arms. The suspension works well everywhere, and at any speed. It literally floats over washboard, but without any awkward feeling of disconnect with the trail. Tracking is also precise; We never detected any sideways deflection off of bumps or rocks. Nothing about the ride provokes hesitation. It begs you to push it harder, and always with satisfying results.

The numbers are big all around. Can-Am upped ground clearance significantly to 12 inches, and wheel track width has been increased to just under 48 inches (two inches wider than the Outlander 570). This made for more suspension travel up front at 9.75 inches (+1.25 in.) and 10.25 inches at the rear (+1.75 in.).

Arched front A-arms and rear A-arms are attached to the frame with a forward-facing attack angle, designed to soften blows from deep ruts and rocks, and it works great. Turning is also enhanced, whether rounding a sweeping corner at speed, or navigating a tight hairpin. There’s no hint of annoying understeer unless you blatantly force it, but it’s easily corrected by backing off the throttle slightly. The XT package does include Tri-Mode Dynamic Power Steering, but so did the old Outlander 570. The difference here is in the improved chassis balance and suspension improvements. It all adds up to a more planted, stable, and confident feel at the controls.


Despite the middleweight designation, Can-Am claims the Outlander 700 can handle heavyweight level cargo. The front rack is rated for 120 pounds and the rear is good for up to 240 pounds. This not only makes it the best in class for cargo hauling, it also matches or beats every big bore competitor machine with the exception of the 55-inch wide Polaris Sportsman XP 1000 S. It even knocks out the Outlander XT-P 1000R by 60 pounds.

The same can be said about the Outlander 700’s 1,830-pound towing capacity. It not only outperforms the outgoing Outlander 570 by 530 pounds, but it also bests the Outlander XT 1000R by 180 pounds, which makes us wonder if the larger Outlander models are also going to receive a complete redesign soon.

With all fluids and a full tank of fuel, the Outlander XT 700 comes in just below 900 pounds. Stopping it is handled by dual front and single rear disc brakes like before, but new metallic brake pads handle the heat better. During our two days of testing, brake fade was never an issue. Measured braking to all four wheels is controlled with the front lever, while a foot lever activates the rear brakes. We found ourselves using the single hand lever most of the time but would prefer a dual handbrake setup for tackling more technical terrain.


Can-Am claims the new narrower engine design reduces space between the knees for added comfort, but we didn’t notice any remarkable difference while straddling the seat. The thick seat is narrow at the front, and wide at the rear, much like a sport quad. It’s flat and flows well for easy forward, back and side to side body movement. A glove box positioned between the knees is large enough to accommodate all personal belongings. With the engine and CVT exhaust exiting straight out the rear, we never felt any heat radiating from the engine.

Footwells are longer and deeper than those on the Outlander 570. Plastic foot pegs are replaceable with two bolts for when they eventually wear out, or you can just purchase Can-Am’s steel pegs ($55.99) that come on the X MR trim and never worry about your boots slipping again.


Upgrading from the base model Outlander 700 to the Outlander XT 700 will tack an extra $2,000 on to the price tag, but it’s money well spent. The extra coin will get you Tri-Mode Dynamic Power Steering (manual steering on base), Visco-Lok with Quick Engagement (QE) front differential, 26-inch XPS Trail Force tires on 14-inch aluminum wheels, a winch with 3,500-pound capacity, front and rear bumpers and a premium glove box with cell phone holder and internal USB charger.


Engine side panels are easy to remove without tools and expose easy access to engine and CVT fluid inlets. The skid plate has cutaway access holes at the drain points designed in a way that won’t create a mess. The air filter is exposed by removing the instrument cluster in front of the handlebars – tools not required here either. This is also where the air intake for the CVT is located. Speaking of CVT, the cover can be removed in just minutes. If that doesn’t simplify things enough, the maintenance schedule for the Outlander 700 begins at 1 year, or 2,000 miles, with 2,000-mile maintenance intervals thereafter.


The Outlander XT 700 is a new ATV no matter how you look at it. It makes more usable power but is also easier to ride. We can’t say enough good things about how this ATV handles rough terrain and corners. When it comes to chores, this super duty middleweight has the carrying capacity to hang with the big bores. The price difference between the outgoing Can-Am Outlander XT 570 and the new Can-Am XT 700 is $470. While some other manufacturers recently charged that much for new colors and graphics, Can-Am produced an entirely new ATV. They did their homework, so say what you will about the loss of the 570 V-twin – this machine is better!


Engine… Rotax ACE 650 cc, single cylinder, liquid cooled

Fuel Delivery System… EFI

Transmission… pDrive primary CVT L/H/N/R/P

Drive Train… Selectable 2WD/4WD with Visco-Lok QE auto-locking front differential

Power Steering… Tri-Mode Dynamic Power Steering (DPS)

Front Suspension… Double A-arm; 9.75 in. travel

Front Shocks… Twin tube

Rear Suspension… Double A-arm; 10.25 in. travel

Rear Shocks… Twin tube

Front & Rear Tires… XPS Trail Force 26 x 8/10 x 14 in.

Wheels… 14 in. aluminum

Front Brakes… Dual 214 mm disc brakes with hydraulic twin-piston calipers

Rear Brakes… Single 214 mm disc brake with hydraulic twin-piston caliper

Estimated Dry Weight… 858 lb.

L x W x H… 89.9 x 48.8 x 48.2 in.

Wheelbase… 53 in.

Ground Clearance… 12 in.

Seat Height… 38.6 in.

Rack Capacity… Front: 120 lb / Rear: 240 lb

Storage Capacity… 9 gal.

Towing Capacity… 1,830 lb.

Fuel Capacity… 5.1 gal.

Gauge… 4.5 in. digital display

Lighting… LED headlights

Winch… 3,500 lb. winch

Factory Warranty… 6 months

Extended B.E.S.T. term available up to 36 months


TESTED: 2023.5 CAN-AM OUTLANDER XT 700 (2024)
Top Articles
Latest Posts
Article information

Author: Trent Wehner

Last Updated:

Views: 6408

Rating: 4.6 / 5 (76 voted)

Reviews: 83% of readers found this page helpful

Author information

Name: Trent Wehner

Birthday: 1993-03-14

Address: 872 Kevin Squares, New Codyville, AK 01785-0416

Phone: +18698800304764

Job: Senior Farming Developer

Hobby: Paintball, Calligraphy, Hunting, Flying disc, Lapidary, Rafting, Inline skating

Introduction: My name is Trent Wehner, I am a talented, brainy, zealous, light, funny, gleaming, attractive person who loves writing and wants to share my knowledge and understanding with you.